Idustrial Applications of nuclear energy

مدیران انجمن: parse, javad123javad

ارسال پست
نمایه کاربر
armin57ghazal

نام: آرمین

محل اقامت: تهران

عضویت : چهارشنبه ۱۳۸۹/۱۱/۶ - ۱۹:۲۷


پست: 484

سپاس: 579

جنسیت:

تماس:

Idustrial Applications of nuclear energy

پست توسط armin57ghazal »

Enhancing Product Quality

Sensitive, accurate and reliable control systems are essential to industry. Nucleonic gauges – instruments that use a radioisotope source to measure materials and products – can improve product quality, optimise industrial processes and save energy and materials. They are extremely sensitive, and often succeed where other methods fail.

Nucleonic gauges are ideal for arduous or dangerous industrial environments, including high-temperature and high-pressure situations. They are also non-invasive – no physical contact is required between the sensor and the material – thus quality checks can be performed on-line during production. Sizeable financial benefits can be realised from the reduction of scrap and waste and the assurance of high quality products that retain customer loyalty.

The metal-coating industry uses nucleonic gauges to ensure optimum coating thicknesses. Moisture gauges are essential in industries involving construction materials, glass, mineral processing, chemicals and food. Radioisotope gauges, used to measure mass per unit of area – often at high speeds – are indispensable in manufacturing aluminium foil, paper and steel plate.
Advanced Materials: Exceptional Properties

Many industries are now demanding higher-performance polymeric materials at lower cost. Radiation is proving to be a valuable tool in polymer processing, and the IAEA is assisting many developing countries in expanding their use.

Gamma and electron beams can induce beneficial properties in plastic or polymeric materials and have been used for decades in developed countries. Radiation can cause cross-linking of some molecules to form giant molecules which have higher heat, chemical and mechanical resistance. It can also degrade some plastics, reducing them to a powder that can be used as an industrial lubricant.

The wire and cable industry uses cross-linking to strengthen the insulation of wires and cables and make them more heat resistant. The pliable plastic is extruded, and then radiation cross-linked to harden it.

Radiation vulcanisation of natural rubber latex (RVNRL) imparts strength and elasticity, making it ideal for the production of surgical gloves, catheters and balloons used in cardiac procedures. RVNRL also results in people-friendly products that are free of allergy-causing residues.

Non Destructive Testing

It is essential to test some materials, products, engineering structures or buildings without altering their properties or affecting their usefulness. Non-destructive testing (NDT) comes in many forms, one of the most popular being radiography, which uses a radioisotope or X-ray source. NDT radiography is used extensively in the petroleum, chemical and nuclear industries, as well as on assembly lines to test consumer goods. Light alloy castings, such as car wheels, receive a quality check of this type before leaving the factory. Pipelines, too, are prime NDT candidates – both during installation and maintenance - to ensure that welds remain intact.

In NDT radiography, gamma rays from a sealed source or X-rays are directed through the object, and the results shown on film or other media. Imperfections are indicated as the density changes – just as a body X-ray reveals broken bones. A recent development is real-time radiography, where faults can be evaluated on a computer screen for assembly-line inspections and troubleshooting.

ارسال پست